T8: Signals and Emissions questions (2026β2030 Technician pool)
All 47 questions from subelement T8, Signals and Emissions, with the correct answer marked. Your exam draws one question from each group below, so you'll see 4 T8 questions. On test day the answer order can be shuffled, so learn the answer, not the letter. Tap "Why" for a plain-English explanation.
Groups: T8A Β· T8B Β· T8C Β· T8D
T8A (12 questions, 1 on your exam)
- A. Spread spectrum
- B. Packet radio
- C. Single sideband β
- D. Phase shift keying (PSK)
Why, and a memory hook
Single sideband (SSB) is a form of amplitude modulation, with the carrier and one sideband removed.
Memory hook: SSB is AM with parts removed.
- A. FM or PM β
- B. SSB
- C. AM
- D. PSK
Why, and a memory hook
VHF packet radio commonly uses FM or PM.
Memory hook: Packet on VHF: FM.
- A. FM
- B. DRM
- C. SSB β
- D. PM
Why, and a memory hook
SSB is often used for long-distance (weak-signal) contacts on VHF and UHF because it is more efficient than FM.
Memory hook: SSB reaches farther.
- A. AM
- B. SSB
- C. PSK
- D. FM or PM β
Why, and a memory hook
FM or PM is commonly used for VHF and UHF voice repeaters.
Memory hook: Repeaters use FM.
- A. FM voice
- B. SSB voice
- C. CW β
- D. Slow-scan TV
Why, and a memory hook
CW has the narrowest bandwidth of the listed signal types, around 150 Hz.
Memory hook: CW is narrowest.
- A. Upper sideband β
- B. Lower sideband
- C. Suppressed sideband
- D. Inverted sideband
Why, and a memory hook
Upper sideband is normally used for 10-meter HF, VHF and UHF SSB, while lower sideband is the convention below 10 MHz.
Memory hook: Upper above 10 MHz.
- A. SSB signals are easier to tune in correctly
- B. SSB signals are less susceptible to interference
- C. SSB signals have narrower bandwidth β
- D. SSB signals are less susceptible to high SWR
Why, and a memory hook
SSB signals have narrower bandwidth than FM, which makes better use of the spectrum and improves weak-signal performance.
Memory hook: SSB is narrow, FM is wide.
- A. 1 kHz
- B. 3 kHz β
- C. 6 kHz
- D. 15 kHz
Why, and a memory hook
A typical SSB voice signal is about 3 kHz wide.
Memory hook: SSB is 3 kHz.
- A. Less than 500 Hz
- B. About 150 kHz
- C. Between 10 and 15 kHz β
- D. Between 50 and 125 kHz
Why, and a memory hook
An FM voice signal on VHF repeaters is roughly 10 to 15 kHz wide.
Memory hook: FM voice: 10 to 15 kHz.
- A. More than 10 MHz
- B. About 6 MHz β
- C. About 3 MHz
- D. About 1 MHz
Why, and a memory hook
AM fast-scan TV transmissions are about 6 MHz wide.
Memory hook: Fast-scan TV: 6 MHz.
- A. 2.4 kHz
- B. 150 Hz β
- C. 1000 Hz
- D. 15 kHz
Why, and a memory hook
A CW signal requires only about 150 Hz of bandwidth.
Memory hook: CW is about 150 Hz.
- A. Voice quality is poorer
- B. Only one signal can be received at a time β
- C. FM signals are harder to tune
- D. FM signals are more susceptible to high SWR
Why, and a memory hook
With FM, only one signal can be received at a time, because the strongest signal captures the receiver. This is a disadvantage compared with SSB.
Memory hook: FM captures one signal.
T8B (12 questions, 1 on your exam)
- A. The signal strength of received signals
- B. Time of day accurate to plus or minus 1/10 second
- C. Health and status of the satellite β
- D. All these choices are correct
Why, and a memory hook
Satellite beacons typically transmit telemetry about the health and status of the satellite.
Memory hook: Beacon = health check.
- A. Possibility of commanding the satellite to an improper mode
- B. Blocking access by other users β
- C. Overloading the satellite batteries
- D. Possibility of rebooting the satellite control computer
Why, and a memory hook
Excessive effective radiated power on a satellite uplink can block access by other users, since the satellite's transponder is shared.
Memory hook: Too much power hogs the satellite.
- A. Maps showing the real-time position of the satellite track over Earth
- B. The time, azimuth, and elevation of the start, maximum altitude, and end of a pass
- C. The apparent frequency of the satellite transmission, including effects of Doppler shift
- D. All these choices are correct β
Why, and a memory hook
Satellite tracking programs provide the location of the satellite, the time of a pass, and the Doppler shift frequencies, so all the choices are correct.
Memory hook: Trackers tell where, when, and shift.
- A. SSB
- B. FM
- C. CW/data
- D. All these choices are correct β
Why, and a memory hook
Amateur satellites commonly use FM, SSB and CW/digital modes, so all the listed modes are used.
Memory hook: Satellites use many modes.
- A. The primary transmit antenna on the satellite
- B. An indicator light that shows where to point your antenna
- C. A reflective surface on the satellite
- D. A transmission from a satellite that contains status information β
Why, and a memory hook
A satellite beacon is a transmission from a satellite that contains status information.
Memory hook: Beacon = status broadcast.
- A. The satellite transmitted power
- B. The Keplerian elements β
- C. The last observed time of zero Doppler shift
- D. All these choices are correct
Why, and a memory hook
The Keplerian elements (orbital parameters) are inputs to a satellite tracking program, along with your location and time.
Memory hook: Keplerian elements describe the orbit.
- A. A change in the satellite orbit
- B. A mode where the satellite receives signals on one band and transmits on another
- C. An observed change in signal frequency caused by relative motion between the satellite and Earth station β
- D. A special digital communications mode for some satellites
Why, and a memory hook
Doppler shift is an observed change in signal frequency caused by relative motion between the satellite and the Earth station.
Memory hook: Motion shifts frequency.
- A. The satellite uplink is in the 15-meter band and the downlink is in the 10-meter band
- B. The satellite uplink is in the 70-centimeter band and the downlink is in the 2-meter band β
- C. The satellite operates using ultraviolet frequencies
- D. The satellite frequencies are usually variable
Why, and a memory hook
U/V mode means the uplink is in the UHF (70-centimeter) band and the downlink is in the VHF (2-meter) band.
Memory hook: U up, V down.
- A. Circular polarized noise interference radiated from the sun
- B. Rotation of the satellite and its antennas β
- C. Doppler shift of the received signal
- D. Interfering signals within the satellite uplink band
Why, and a memory hook
Spin fading is caused by rotation of the satellite and its antennas, which varies the signal polarization and strength.
Memory hook: Spinning satellite, fading signal.
- A. Low Energy Orbit, which conserves battery power
- B. Low Elevation Orbit, which appears close to the horizon from the earth station
- C. Low Equilibrium Orbit, which has a slightly unstable period
- D. Low Earth Orbit, which has a period of around 100 minutes β
Why, and a memory hook
LEO means Low Earth Orbit, which has an orbital period of around 100 minutes.
Memory hook: Low orbit, about 100 minutes.
- A. Anyone β
- B. Only the satellite control operator
- C. Only the control operator or a licensed radio amateur who has received the encryption key from the control operator
- D. Only a licensed radio amateur who has received the encryption key from AMSAT
Why, and a memory hook
Anyone may receive amateur satellite telemetry; a license is needed only to transmit.
Memory hook: Listening needs no license.
- A. Check your signal strength report in the telemetry data
- B. Listen for distortion on your downlink signal
- C. Your signal strength on the downlink should be about the same as the beacon β
- D. Compare your signal to others on the downlink using an internet SDR receiver
Why, and a memory hook
With a linear transponder, adjust your uplink power until your downlink signal is about as strong as the satellite's beacon. Stronger than that hogs the transponder.
Memory hook: Match the beacon.
T8C (11 questions, 1 on your exam)
- A. Echolocation
- B. Doppler radar
- C. Radio direction finding β
- D. Phase locking
Why, and a memory hook
Radio direction finding is used to locate sources of noise interference or jamming.
Memory hook: Direction finding finds the source.
- A. Calibrated SWR meter
- B. A directional antenna β
- C. A directional wattmeter
- D. All these choices are correct
Why, and a memory hook
A directional antenna is useful for hidden transmitter hunts, since its pattern shows the bearing of the signal.
Memory hook: Beam finds the fox.
- A. Simulated emergency exercises
- B. Net operations
- C. Hidden transmitter hunts
- D. Contesting β
Why, and a memory hook
Contesting is an operating activity where you contact as many stations as possible during a specified period.
Memory hook: Contest = max contacts in a time window.
- A. Signing only the last two letters of your call if there are many other stations calling
- B. Contacting the station twice to be sure that you are in his log
- C. Sending only the minimum information needed for proper identification and the contest exchange β
- D. Adding βPlease copyβ before your exchange
Why, and a memory hook
In a contest, send only the minimum information needed for proper identification and the contest exchange, which keeps contacts quick.
Memory hook: Short and sweet exchanges.
- A. A letter-number designator assigned to a geographic location β
- B. A letter-number designator assigned to an azimuth and elevation
- C. An instrument for locating faults in power amplifiers
- D. An instrument for radio direction finding
Why, and a memory hook
A grid locator is a letter-number designator assigned to a geographic location, used in VHF and UHF contesting and digital modes.
Memory hook: Grid = letter-number map square.
- A. By obtaining a password that is sent via voice to the node
- B. By using Dual-Tone Multi-Frequency (DTMF) signals β
- C. By entering the proper internet password
- D. By using Continuous Tone-Coded Squelch System (CTCSS) tone codes
Why, and a memory hook
IRLP nodes are accessed over the air using DTMF signals.
Memory hook: IRLP: touch tones.
- A. A set of rules specifying how to identify your station when linked over the internet to another station
- B. A technique employed to βspotβ DX stations via the internet
- C. A technique for measuring the modulation quality of a transmitter using remote sites monitored via the internet
- D. A method of delivering voice communications over the internet using digital techniques β
Why, and a memory hook
VoIP is a method of delivering voice communications over the internet using digital techniques.
Memory hook: VoIP = voice as internet data.
- A. A technique to connect amateur radio systems, such as repeaters, via the internet β
- B. A system for providing access to websites via amateur radio
- C. A system for informing amateurs in real time of the frequency of active DX stations
- D. A technique for measuring signal strength of an amateur transmitter via the internet
Why, and a memory hook
The Internet Radio Linking Project connects amateur radio systems, such as repeaters, via the internet.
Memory hook: IRLP links repeaters online.
- A. IRLP
- B. D-STAR
- C. DMR
- D. EchoLink β
Why, and a memory hook
EchoLink lets a station transmit through a repeater without using a radio to start the transmission, for example from a computer or phone.
Memory hook: EchoLink: no radio needed.
- A. Complete the required EchoLink training
- B. Purchase a license to use the EchoLink software
- C. Register your call sign and provide proof of license β
- D. At least a General Class license
Why, and a memory hook
Before using EchoLink you must register your call sign and provide proof of license.
Memory hook: EchoLink checks your license.
- A. A gateway β
- B. A repeater
- C. A digipeater
- D. A beacon
Why, and a memory hook
A station that connects other amateur stations to the internet is a gateway.
Memory hook: Gateway = door to the internet.
T8D (12 questions, 1 on your exam)
- A. Packet radio
- B. IEEE 802.11
- C. FT8
- D. All these choices are correct β
Why, and a memory hook
Packet, PSK31 and APRS are all digital communications modes, so all the listed choices are correct.
Memory hook: Digital modes come in many flavors.
- A. A wideband FM voice mode
- B. A digital mode capable of low signal-to-noise operation β
- C. An eight-channel multiplex mode for FM repeaters
- D. A digital slow-scan TV mode with forward error correction and automatic color compensation
Why, and a memory hook
FT8 is a digital mode capable of working at very low signal-to-noise ratios, which suits weak-signal operation.
Memory hook: FT8 works in the noise.
- A. GPS position data
- B. Text messages
- C. Weather data
- D. All these choices are correct β
Why, and a memory hook
APRS can transmit position, weather station data, text messages, and more, so all the listed data types are possible.
Memory hook: APRS carries many kinds of data.
- A. A digital transmission standard for encrypting data
- B. A special mode for satellite uplink
- C. An analog fast-scan color TV signal β
- D. A frame compression scheme for TV signals
Why, and a memory hook
NTSC is an analog fast-scan color TV signal.
Memory hook: NTSC = analog color TV.
- A. Providing real-time tactical digital communications in conjunction with a map showing the locations of stations β
- B. Automatically showing the number of packets transmitted via PACTOR during a specific time interval
- C. Providing voice over internet connection between repeaters
- D. Providing information on the number of stations signed into a repeater
Why, and a memory hook
APRS provides real-time tactical digital communications along with a map showing stations' locations.
Memory hook: APRS = map plus messages.
- A. Pulse Shift Keying
- B. Phase Shift Keying β
- C. Packet Sampled Keying
- D. Power Sampled Keying
Why, and a memory hook
PSK stands for Phase Shift Keying, a mode that conveys data by changing the carrier phase.
Memory hook: PSK = Phase Shift Keying.
- A. A technique for time-multiplexing two digital voice signals on a single 12.5 kHz repeater channel β
- B. An automatic position tracking mode for FM mobiles communicating through repeaters
- C. An automatic computer logging technique for hands-off logging when communicating while operating a vehicle
- D. A digital technique for transmitting on two repeater inputs simultaneously for automatic error correction
Why, and a memory hook
DMR time-multiplexes two digital voice signals on a single 12.5 kHz repeater channel, using two time slots.
Memory hook: Two timeslots per channel.
- A. A checksum that permits error detection
- B. A header that contains the call sign of the station to which the information is being sent
- C. Automatic repeat request in case of error
- D. All these choices are correct β
Why, and a memory hook
Packet transmissions include the source and destination call signs, error-checking data, and the payload data, so all the choices apply.
Memory hook: Packets carry address, data and checks.
- A. A type of electromagnetic propagation
- B. A digital mode used primarily on 2-meter FM
- C. Error correction for digital transmission using code words
- D. Another name for a Morse code transmission β
Why, and a memory hook
CW is another name for a Morse code transmission.
Memory hook: CW = Morse code.
- A. Earth-Moon-Earth
- B. Weak signal propagation beacons
- C. Meteor scatter
- D. All these choices are correct β
Why, and a memory hook
The WSJT-X suite supports weak-signal modes for contacts, such as FT8, moonbounce (EME) and meteor scatter, so all the listed activities are supported.
Memory hook: WSJT-X: many weak-signal activities.
- A. A special transmission format limited to video signals
- B. A system used to encrypt command signals to an amateur radio satellite
- C. An error correction method in which the receiving station detects errors and sends a request for retransmission β
- D. A method of compressing data using autonomous reiterative Q codes prior to final encoding
Why, and a memory hook
ARQ is an error-correction method in which the receiving station detects errors and sends a request for retransmission.
Memory hook: ARQ = Automatic Repeat reQuest.
- A. An amateur-radio data network using commercial Wi-Fi equipment with modified firmware β
- B. A wide-bandwidth digital voice mode employing DMR protocols
- C. An amateur-radio satellite communications network using modified commercial satellite TV hardware
- D. An internet linking protocol allowing communication through repeaters around the world
Why, and a memory hook
An amateur mesh network is a data network built from commercial Wi-Fi equipment with modified firmware.
Memory hook: Mesh = Wi-Fi gear, ham firmware.
Test yourself on these
Take a free 35-question practice exam drawn one per group, just like the real thing.
Start the free practice testβ T7: Practical CircuitsAll subelementsT9: Antennas and Feed Lines β