Ham Tech Exam โ€บ Question pool โ€บ T5

T5: Electrical Principles questions (2026โ€“2030 Technician pool)

50 questions in the pool ยท 4 on your exam ยท official NCVEC 2026โ€“2030 pool (public domain)

All 50 questions from subelement T5, Electrical Principles, with the correct answer marked. Your exam draws one question from each group below, so you'll see 4 T5 questions. On test day the answer order can be shuffled, so learn the answer, not the letter. Tap "Why" for a plain-English explanation.

Groups: T5A ยท T5B ยท T5C ยท T5D

T5A (11 questions, 1 on your exam)

T5A01: Electrical current is measured in which of the following units?
  • A. Volts
  • B. Watts
  • C. Ohms
  • D. Amperes โœ“
Why, and a memory hook

Electric current is measured in amperes (amps).

Memory hook: Current = amps.

T5A02: Electrical power is measured in which of the following units?
  • A. Volts
  • B. Watts โœ“
  • C. Watt-hours
  • D. Amperes
Why, and a memory hook

Electrical power is measured in watts.

Memory hook: Power = watts.

T5A03: What is the term for the flow of electrons in an electric circuit?
  • A. Voltage
  • B. Amperes per second
  • C. Volts per second
  • D. Current โœ“
Why, and a memory hook

The flow of electrons in a circuit is called current.

Memory hook: Electron flow = current.

T5A04: What term describes the number of times per second that an alternating current makes a complete cycle?
  • A. Pulse rate
  • B. Wave number
  • C. Frequency โœ“
  • D. Wavelength
Why, and a memory hook

The number of complete AC cycles per second is the frequency.

Memory hook: Cycles per second = frequency.

T5A05: A difference in which of the following causes electron flow?
  • A. Voltage โœ“
  • B. Ampere-hours
  • C. Capacitance
  • D. Inductance
Why, and a memory hook

A difference in voltage (electrical potential) pushes electrons through a circuit, which causes current flow.

Memory hook: Voltage pushes the electrons.

T5A06: What is the unit of frequency?
  • A. Hertz โœ“
  • B. Henry
  • C. Farad
  • D. Epicycles per second
Why, and a memory hook

Frequency is measured in hertz (cycles per second).

Memory hook: Hertz = cycles per second.

T5A07: Why are metals generally good conductors of electricity?
  • A. They have relatively high density
  • B. They have many free electrons โœ“
  • C. They have many free protons
  • D. They have relatively high Youngโ€™s modulus values
Why, and a memory hook

Metals have many free electrons that move easily, which makes them good conductors.

Memory hook: Free electrons carry current.

T5A08: Which of the following is a good electrical insulator?
  • A. Sea water
  • B. Glass โœ“
  • C. Stainless steel
  • D. Graphite
Why, and a memory hook

Glass is a good electrical insulator. Metals such as copper, aluminum and gold are conductors.

Memory hook: Glass blocks current.

T5A09: Which of the following describes alternating current?
  • A. Current that alternates between a positive direction and zero
  • B. Current that alternates between a negative direction and zero
  • C. Current that alternates between positive and negative directions โœ“
  • D. All these answers are correct
Why, and a memory hook

Alternating current repeatedly changes direction, alternating between positive and negative.

Memory hook: AC alternates.

T5A10: Which term describes the rate at which electrical energy is used?
  • A. Resistance
  • B. Current
  • C. Power โœ“
  • D. Voltage
Why, and a memory hook

Power is the rate at which electrical energy is used.

Memory hook: Power = rate of energy use.

T5A11: What type of current flow is opposed by resistance?
  • A. Direct current
  • B. Alternating current
  • C. RF current
  • D. All these choices are correct โœ“
Why, and a memory hook

Resistance opposes all types of current flow: direct current, alternating current, and pulsating (varying) direct current.

Memory hook: Resistance opposes every current.

T5B (13 questions, 1 on your exam)

T5B01: How many milliamperes is 1.5 amperes?
  • A. 0.0000015 milliamperes
  • B. 0.0015 milliamperes
  • C. 1500 milliamperes โœ“
  • D. 1,500,000 milliamperes
Why, and a memory hook

1 ampere is 1000 milliamperes, so 1.5 A is 1500 mA.

Memory hook: Milli means a thousandth: move the decimal 3 places.

T5B02: Which is equal to 1,500,000 hertz?
  • A. 1500 kHz โœ“
  • B. 1500 MHz
  • C. 15 GHz
  • D. 150 kHz
Why, and a memory hook

1500 kHz equals 1,500,000 Hz because a kilohertz is 1000 hertz.

Memory hook: Kilo = 1000.

T5B03: Which is equal to one kilovolt?
  • A. One one-thousandth of a volt
  • B. One hundred volts
  • C. One thousand volts โœ“
  • D. One million volts
Why, and a memory hook

Kilo means one thousand, so one kilovolt is 1000 volts.

Memory hook: Kilo = thousand.

T5B04: Which is equal to one microvolt?
  • A. One one-millionth of a volt โœ“
  • B. One million volts
  • C. One thousand kilovolts
  • D. One one-thousandth of a volt
Why, and a memory hook

Micro means one millionth, so one microvolt is one one-millionth of a volt.

Memory hook: Micro = millionth.

T5B05: Which is equal to 500 milliwatts?
  • A. 5 watts
  • B. 0.5 watts โœ“
  • C. 500,000 watts
  • D. 500,000,000 watts
Why, and a memory hook

500 milliwatts is 500/1000 = 0.5 watts.

Memory hook: Milli = divide by 1000.

T5B06: Which is equal to 3000 milliamperes?
  • A. 0.003 amperes
  • B. 0.3 amperes
  • C. 3,000,000 amperes
  • D. 3 amperes โœ“
Why, and a memory hook

3000 mA divided by 1000 is 3 amperes.

Memory hook: Milli to base: divide by 1000.

T5B07: Which is equal to 3.525 MHz?
  • A. 0.003525 kHz
  • B. 35.25 kHz
  • C. 3525 kHz โœ“
  • D. 3,525,000 kHz
Why, and a memory hook

1 MHz is 1000 kHz, so 3.525 MHz is 3525 kHz.

Memory hook: MHz to kHz: move decimal 3 right.

T5B08: Which is equal to 1,000,000 picofarads?
  • A. 0.001 microfarads
  • B. 1 microfarad โœ“
  • C. 1000 microfarads
  • D. 1,000,000,000 microfarads
Why, and a memory hook

One microfarad equals 1,000,000 picofarads, since pico is 10 to the minus 12 and micro is 10 to the minus 6.

Memory hook: Pico to micro: a million.

T5B09: Which decibel value most closely represents a power increase from 5 watts to 10 watts?
  • A. 2 dB
  • B. 3 dB โœ“
  • C. 5 dB
  • D. 10 dB
Why, and a memory hook

Doubling power (5 W to 10 W) is a 3 dB increase.

Memory hook: Double power = plus 3 dB.

T5B10: Which decibel value most closely represents a power decrease from 12 watts to 3 watts?
  • A. -1 dB
  • B. -3 dB
  • C. -6 dB โœ“
  • D. -9 dB
Why, and a memory hook

Cutting 12 watts to 3 watts is a factor of one fourth, which is two halvings, or 2 times (-3 dB) = -6 dB.

Memory hook: Quarter power = minus 6 dB.

T5B11: Which decibel value represents a power increase from 20 watts to 200 watts?
  • A. 10 dB โœ“
  • B. 12 dB
  • C. 18 dB
  • D. 28 dB
Why, and a memory hook

A tenfold power increase (20 W to 200 W) is +10 dB.

Memory hook: Ten times = plus 10 dB.

T5B12: Which is equal to 28400 kHz?
  • A. 28.400 kHz
  • B. 2.800 MHz
  • C. 284.00 MHz
  • D. 28.400 MHz โœ“
Why, and a memory hook

28400 kHz divided by 1000 is 28.400 MHz.

Memory hook: kHz to MHz: divide by 1000.

T5B13: Which is equal to 2425 MHz?
  • A. 0.002425 GHz
  • B. 24.25 GHz
  • C. 2.425 GHz โœ“
  • D. 242.5 GHz
Why, and a memory hook

2425 MHz divided by 1000 is 2.425 GHz.

Memory hook: MHz to GHz: divide by 1000.

T5C (12 questions, 1 on your exam)

T5C01: What describes the ability to store energy in an electric field?
  • A. Inductance
  • B. Resistance
  • C. Frequency
  • D. Capacitance โœ“
Why, and a memory hook

Capacitance is the ability to store energy in an electric field.

Memory hook: Capacitor = electric field.

T5C02: What is the unit of capacitance?
  • A. Farad โœ“
  • B. Ohm
  • C. Volt
  • D. Henry
Why, and a memory hook

Capacitance is measured in farads.

Memory hook: Capacitance = farad.

T5C03: What describes the ability to store energy in a magnetic field?
  • A. Admittance
  • B. Capacitance
  • C. Resistance
  • D. Inductance โœ“
Why, and a memory hook

Inductance is the ability to store energy in a magnetic field.

Memory hook: Inductor = magnetic field.

T5C04: What is the unit of inductance?
  • A. Coulomb
  • B. Farad
  • C. Henry โœ“
  • D. Ohm
Why, and a memory hook

Inductance is measured in henrys.

Memory hook: Inductance = henry.

T5C05: What is the unit of impedance?
  • A. Volt
  • B. Ampere
  • C. Coulomb
  • D. Ohm โœ“
Why, and a memory hook

Impedance is measured in ohms.

Memory hook: Impedance = ohms.

T5C06: What is the abbreviation for kilohertz?
  • A. kHz โœ“
  • B. khz
  • C. KHz
  • D. KHZ
Why, and a memory hook

The abbreviation for kilohertz is kHz.

Memory hook: k lowercase for kilo.

T5C07: What is the abbreviation for megahertz?
  • A. mHz
  • B. mHZ
  • C. Mhz
  • D. MHz โœ“
Why, and a memory hook

The abbreviation for megahertz is MHz.

Memory hook: M uppercase for mega.

T5C08: What formula is used to calculate electrical power (P) in a DC circuit?
  • A. P = I x E โœ“
  • B. P = E / I
  • C. P = I2 x E
  • D. P = I / E
Why, and a memory hook

In a DC circuit, power equals current times voltage: P = I x E.

Memory hook: PIE: Power = I times E.

T5C09: How much power is delivered by a voltage of 13.8 volts DC and a current of 10 amperes?
  • A. 138 watts โœ“
  • B. 0.7 watts
  • C. 23.8 watts
  • D. 3.8 watts
Why, and a memory hook

P = E x I = 13.8 V x 10 A = 138 W.

Memory hook: 13.8 times 10 is 138.

T5C10: How much power is delivered by a voltage of 12 volts DC and a current of 2.5 amperes?
  • A. 4.8 watts
  • B. 30 watts โœ“
  • C. 14.5 watts
  • D. 0.208 watts
Why, and a memory hook

P = E x I = 12 V x 2.5 A = 30 W.

Memory hook: 12 times 2.5 is 30.

T5C11: How much current is required to deliver 120 watts at a voltage of 12 volts DC?
  • A. 0.1 amperes
  • B. 10 amperes โœ“
  • C. 12 amperes
  • D. 132 amperes
Why, and a memory hook

Rearranging P = E x I gives I = P / E = 120 W / 12 V = 10 A.

Memory hook: Current = watts over volts.

T5C12: What is impedance?
  • A. The opposition to AC current flow โœ“
  • B. The inverse of resistance
  • C. The inverse of reactance
  • D. The power handling capability of a component
Why, and a memory hook

Impedance is the opposition to AC current flow, including the effects of resistance and reactance.

Memory hook: Impedance = AC opposition.

T5D (14 questions, 1 on your exam)

T5D01: What formula is used to calculate current in a circuit?
  • A. I = E x R
  • B. I = E / R โœ“
  • C. I = E2 x R
  • D. I = E2 / R
Why, and a memory hook

Ohm's law gives current as voltage divided by resistance: I = E / R.

Memory hook: Ohm's law: I = E / R.

T5D02: What formula is used to calculate voltage in a circuit?
  • A. E = I x R โœ“
  • B. E = I / R
  • C. E = I2 x R
  • D. E = I2 / R
Why, and a memory hook

Ohm's law gives voltage as current times resistance: E = I x R.

Memory hook: E = I R.

T5D03: What formula is used to calculate resistance in a circuit?
  • A. R = E x I
  • B. R = E / I โœ“
  • C. R = E + I
  • D. R = E - I
Why, and a memory hook

Ohm's law gives resistance as voltage divided by current: R = E / I.

Memory hook: R = E over I.

T5D04: What is the resistance of a circuit in which a current of 3 amperes flows when connected to 90 volts?
  • A. 3 ohms
  • B. 30 ohms โœ“
  • C. 1/30 ohm
  • D. 270 ohms
Why, and a memory hook

R = E / I = 90 V / 3 A = 30 ohms.

Memory hook: 90 over 3 is 30.

T5D05: What is the resistance of a circuit for which the applied voltage is 12 volts and the current flow is 1.5 amperes?
  • A. 18 ohms
  • B. 0.125 ohms
  • C. 8 ohms โœ“
  • D. 13.5 ohms
Why, and a memory hook

R = E / I = 12 V / 1.5 A = 8 ohms.

Memory hook: 12 over 1.5 is 8.

T5D06: What is the resistance of a circuit that draws 4 amperes from a 12-volt source?
  • A. 3 ohms โœ“
  • B. 16 ohms
  • C. 48 ohms
  • D. 8 ohms
Why, and a memory hook

R = E / I = 12 V / 4 A = 3 ohms.

Memory hook: 12 over 4 is 3.

T5D07: What is the current in a circuit with an applied voltage of 120 volts and a resistance of 80 ohms?
  • A. 9600 amperes
  • B. 200 amperes
  • C. 0.667 amperes
  • D. 1.5 amperes โœ“
Why, and a memory hook

I = E / R = 120 V / 80 ohms = 1.5 A.

Memory hook: 120 over 80 is 1.5.

T5D08: What is the current through a 100-ohm resistor connected across 200 volts?
  • A. 20,000 amperes
  • B. 0.5 amperes
  • C. 2 amperes โœ“
  • D. 100 amperes
Why, and a memory hook

I = E / R = 200 V / 100 ohms = 2 A.

Memory hook: 200 over 100 is 2.

T5D09: What is the current through a 24-ohm resistor connected across 240 volts?
  • A. 2400 amperes
  • B. 0.1 amperes
  • C. 10 amperes โœ“
  • D. 5760 amperes
Why, and a memory hook

I = E / R = 240 V / 24 ohms = 10 A.

Memory hook: 240 over 24 is 10.

T5D10: What is the voltage across a 2-ohm resistor if a current of 0.5 amperes flows through it?
  • A. 1 volt โœ“
  • B. 0.25 volts
  • C. 2.5 volts
  • D. 1.5 volts
Why, and a memory hook

E = I x R = 0.5 A x 2 ohms = 1 V.

Memory hook: Half an amp across 2 ohms is 1 volt.

T5D11: What is the voltage across a 10-ohm resistor if a current of 1 ampere flows through it?
  • A. 1 volt
  • B. 10 volts โœ“
  • C. 11 volts
  • D. 9 volts
Why, and a memory hook

E = I x R = 1 A x 10 ohms = 10 V.

Memory hook: 1 times 10 is 10.

T5D12: What is the voltage across a 10-ohm resistor if a current of 2 amperes flows through it?
  • A. 8 volts
  • B. 0.2 volts
  • C. 12 volts
  • D. 20 volts โœ“
Why, and a memory hook

E = I x R = 2 A x 10 ohms = 20 V.

Memory hook: 2 times 10 is 20.

T5D13: In which type of circuit is the current always the same through all components?
  • A. Series โœ“
  • B. Parallel
  • C. Resonant
  • D. Branch
Why, and a memory hook

In a series circuit there is only one path, so the same current flows through all components.

Memory hook: Series: same current.

T5D14: In which type of circuit is the voltage always the same across all components?
  • A. Series
  • B. Parallel โœ“
  • C. Resonant
  • D. Branch
Why, and a memory hook

In a parallel circuit every component is connected across the same two points, so the voltage is the same across all of them.

Memory hook: Parallel: same voltage.

Test yourself on these

Take a free 35-question practice exam drawn one per group, just like the real thing.

Start the free practice test

โ† T4: Amateur Radio PracticesAll subelementsT6: Electronic and Electrical Components โ†’

Sources

  1. NCVEC: 2026โ€“2030 Technician Question Pool (public release and errata)
  2. 47 CFR ยง 97.503: Element standards (35 questions, 26 to pass)

Want the why behind all 409 questions?

Ham Tech Exam is a Technician study app that explains every answer with a memory hook. Join the list to get the beta first and the launch-day price.

One email when the beta opens, one at launch. No spam. Unsubscribe anytime by emailing [email protected].