Ham Tech Exam β€Ί Question pool β€Ί T3

T3: Radio Wave Propagation questions (2026–2030 Technician pool)

35 questions in the pool Β· 3 on your exam Β· official NCVEC 2026–2030 pool (public domain)

All 35 questions from subelement T3, Radio Wave Propagation, with the correct answer marked. Your exam draws one question from each group below, so you'll see 3 T3 questions. On test day the answer order can be shuffled, so learn the answer, not the letter. Tap "Why" for a plain-English explanation.

Groups: T3A Β· T3B Β· T3C

T3A (12 questions, 1 on your exam)

T3A01: Why do VHF signal strengths sometimes vary greatly when the antenna is moved only a few feet?
  • A. The signal path encounters different concentrations of water vapor
  • B. VHF ionospheric propagation is very sensitive to path length
  • C. Multipath propagation cancels or reinforces signals βœ“
  • D. The Doppler effect causes slight frequency shifts which result in changes in signal strength
Why, and a memory hook

Reflections cause signals to arrive via multiple paths. Moving the antenna a few feet changes whether they add or cancel, so strength varies greatly.

Memory hook: Multipath makes hot and dead spots.

T3A02: How does vegetation affect UHF and microwave signals?
  • A. Causes knife-edge diffraction, distorting voice peaks
  • B. Absorbs signals, leading to poor reception of weak signals βœ“
  • C. Amplifies signals, improving reception of weak signals
  • D. Has no effect
Why, and a memory hook

Leaves and foliage absorb UHF and microwave signals, which hurts reception of weak signals.

Memory hook: Trees soak up UHF.

T3A03: What antenna polarization is normally used for long-distance CW and SSB contacts on the VHF and UHF bands?
  • A. Right-hand circular
  • B. Left-hand circular
  • C. Horizontal βœ“
  • D. Vertical
Why, and a memory hook

Horizontal polarization is normally used for long-distance CW and SSB contacts on VHF and UHF, which is the weak-signal convention.

Memory hook: Weak-signal DX is horizontal.

T3A04: What is the effect of antenna cross-polarization over a line-of-sight VHF or UHF path?
  • A. Modulation sidebands might become inverted
  • B. Received signal strength is reduced βœ“
  • C. Signals have an echo effect
  • D. Nothing significant will happen
Why, and a memory hook

When transmit and receive antennas are cross-polarized (one vertical, one horizontal), received signal strength is reduced.

Memory hook: Mismatched polarity, weaker signal.

T3A05: When using a directional antenna, how might your station be able to communicate with a distant repeater if buildings or obstructions are blocking the direct line of sight path?
  • A. Change from vertical to horizontal polarization
  • B. Try to find a path that reflects signals to the repeater βœ“
  • C. Try the long path
  • D. Increase the antenna SWR
Why, and a memory hook

With a directional antenna, try pointing it at a reflecting surface, since signals can bounce around obstructions to reach the repeater.

Memory hook: Find a bounce path.

T3A06: What is the meaning of the term β€œpicket fencing”?
  • A. Alternating transmissions during a net operation
  • B. Rapid flutter on mobile signals due to multipath propagation βœ“
  • C. A type of ground system used with vertical antennas
  • D. Interference from cable TV in the form of carriers at fixed intervals across the band
Why, and a memory hook

Picket fencing is the rapid flutter heard on mobile signals when multipath propagation makes the signal strength vary quickly as the vehicle moves.

Memory hook: A moving car passes pickets: flutter, flutter.

T3A07: What weather condition might decrease range at microwave frequencies?
  • A. High winds
  • B. Low barometric pressure
  • C. Precipitation βœ“
  • D. Colder temperatures
Why, and a memory hook

Rain and other precipitation absorb and scatter microwave signals, which reduces range at those frequencies.

Memory hook: Rain fades microwaves.

T3A08: What is a likely cause of irregular fading of signals propagated by the ionosphere?
  • A. Frequency shift due to Faraday rotation
  • B. Interference from thunderstorms
  • C. Intermodulation distortion
  • D. Random combining of signals arriving via different paths βœ“
Why, and a memory hook

Signals reflected from the ionosphere arrive via several paths whose random combining causes irregular fading.

Memory hook: Many paths, random fading.

T3A09: Which of the following results from the fact that signals propagated by the ionosphere are elliptically polarized?
  • A. Digital modes are unusable
  • B. Either vertically or horizontally polarized antennas may be used for transmission or reception βœ“
  • C. FM voice is unusable
  • D. Both the transmitting and receiving antennas must be of the same polarization
Why, and a memory hook

Ionospheric propagation changes the polarization of the signal, so the received polarization is elliptical and either a vertical or horizontal antenna can be used.

Memory hook: Skywave polarization gets scrambled, so either works.

T3A10: What effect does multi-path propagation have on data transmissions?
  • A. Transmission rates must be increased by a factor equal to the number of separate paths observed
  • B. Transmission rates must be decreased by a factor equal to the number of separate paths observed
  • C. No significant changes will occur if the signals are transmitted using FM
  • D. Error rates are likely to increase βœ“
Why, and a memory hook

Multipath makes delayed copies of a signal overlap and interfere, so data error rates are likely to increase.

Memory hook: Echoes cause errors.

T3A11: Which region of the atmosphere can reflect HF radio waves?
  • A. The stratosphere
  • B. The troposphere
  • C. The ionosphere βœ“
  • D. The electrosphere
Why, and a memory hook

The ionosphere, a layer of ionized gas high in the atmosphere, can reflect (refract) HF radio waves back to Earth.

Memory hook: Ionosphere = HF mirror.

T3A12: What effect does fog or rain have on 10-meter and 6-meter band signals?
  • A. Absorption
  • B. Little effect βœ“
  • C. Deflection
  • D. Increased range
Why, and a memory hook

Fog and rain have little effect on signals in the 10-meter and 6-meter bands. Attenuation from precipitation matters mainly at microwave frequencies.

Memory hook: Rain only hurts microwaves.

T3B (12 questions, 1 on your exam)

T3B01: What is the relationship between the electric and magnetic fields of an electromagnetic wave?
  • A. They travel at different speeds
  • B. They are in parallel
  • C. They revolve in opposite directions
  • D. They are at right angles βœ“
Why, and a memory hook

The electric and magnetic fields of an electromagnetic wave are at right angles to each other and to the direction of travel.

Memory hook: E and H are perpendicular.

T3B02: What property of a radio wave defines its polarization?
  • A. The orientation of the electric field βœ“
  • B. The orientation of the magnetic field
  • C. The ratio of the energy in the magnetic field to the energy in the electric field
  • D. The ratio of the velocity to the wavelength
Why, and a memory hook

A wave's polarization is defined by the orientation of its electric field.

Memory hook: Polarization = E-field direction.

T3B03: What are the two components of a radio wave?
  • A. Impedance and reactance
  • B. Voltage and current
  • C. Electric and magnetic fields βœ“
  • D. Ionizing and non-ionizing radiation
Why, and a memory hook

A radio wave consists of an electric field and a magnetic field.

Memory hook: Electric plus magnetic.

T3B04: What is the velocity of a radio wave traveling through free space?
  • A. Speed of light βœ“
  • B. Speed of sound
  • C. 0.86 times the speed of light
  • D. 1.86 times the speed of sound
Why, and a memory hook

Radio waves travel through free space at the speed of light.

Memory hook: Radio = light speed.

T3B05: What is the relationship between wavelength and frequency?
  • A. Wavelength gets longer as frequency increases
  • B. Wavelength gets shorter as frequency increases βœ“
  • C. Wavelength is constant at all frequencies
  • D. Wavelength and frequency increase as path length increases
Why, and a memory hook

Wavelength and frequency are inversely related, so as frequency increases the wavelength gets shorter.

Memory hook: Higher frequency, shorter wave.

T3B06: What is the formula for converting frequency to approximate wavelength in meters?
  • A. Wavelength in meters equals frequency in hertz multiplied by 300
  • B. Wavelength in meters equals frequency in hertz divided by 300
  • C. Wavelength in meters equals frequency in megahertz divided by 300
  • D. Wavelength in meters equals 300 divided by frequency in megahertz βœ“
Why, and a memory hook

Wavelength in meters is approximately 300 divided by the frequency in MHz, since wavelength = speed of light divided by frequency.

Memory hook: 300 over MHz.

T3B07: In addition to frequency, which of the following is used to identify amateur radio bands?
  • A. The approximate wavelength in meters βœ“
  • B. Traditional letter/number designators
  • C. Channel numbers
  • D. All these choices are correct
Why, and a memory hook

Besides frequency, amateur bands are identified by their approximate wavelength in meters, such as the 2-meter or 70-centimeter band.

Memory hook: Bands are named by wavelength.

T3B08: What frequency range is referred to as VHF?
  • A. 30 kHz to 300 kHz
  • B. 30 MHz to 300 MHz βœ“
  • C. 300 kHz to 3000 kHz
  • D. 300 MHz to 3000 MHz
Why, and a memory hook

VHF is 30 MHz to 300 MHz.

Memory hook: VHF: 30 to 300 MHz.

T3B09: What frequency range is referred to as UHF?
  • A. 30 to 300 kHz
  • B. 30 to 300 MHz
  • C. 300 to 3000 kHz
  • D. 300 to 3000 MHz βœ“
Why, and a memory hook

UHF is 300 MHz to 3000 MHz (3 GHz).

Memory hook: UHF: 300 to 3000 MHz.

T3B10: What frequency range is referred to as HF?
  • A. 300 to 3000 MHz
  • B. 30 to 300 MHz
  • C. 3 to 30 MHz βœ“
  • D. 300 to 3000 kHz
Why, and a memory hook

HF is 3 MHz to 30 MHz.

Memory hook: HF: 3 to 30 MHz.

T3B11: What is the approximate velocity of a radio wave in free space?
  • A. 150,000,000 meters per second
  • B. 300,000,000 meters per second βœ“
  • C. 300,000,000 miles per hour
  • D. 150,000,000 miles per hour
Why, and a memory hook

Radio waves travel in free space at about 300,000,000 meters per second (the speed of light).

Memory hook: 3 times 10 to the 8th m/s.

T3B12: Which of these frequencies travels at the highest velocity in free space?
  • A. Microwaves
  • B. UHF
  • C. VHF
  • D. All radio frequencies travel at the same velocity βœ“
Why, and a memory hook

All radio frequencies travel at the same velocity in free space, the speed of light.

Memory hook: One speed fits all.

T3C (11 questions, 1 on your exam)

T3C01: Why are simplex UHF signals rarely heard beyond their radio horizon?
  • A. They are too weak to go very far
  • B. FCC regulations prohibit them from going more than 50 miles
  • C. UHF signals are usually not propagated by the ionosphere βœ“
  • D. UHF signals are absorbed by the ionospheric D region
Why, and a memory hook

UHF signals are not usually refracted back by the ionosphere, so simplex UHF contacts are mostly limited to the radio horizon.

Memory hook: UHF passes through the ionosphere.

T3C02: What is a characteristic of HF communication compared with communications on VHF and higher frequencies?
  • A. HF antennas are generally smaller
  • B. HF accommodates wider bandwidth signals
  • C. Long-distance ionospheric propagation is far more common on HF βœ“
  • D. There is less atmospheric interference (static) on HF
Why, and a memory hook

HF signals are commonly refracted by the ionosphere, so long-distance communication is far more common on HF than on VHF and higher.

Memory hook: HF skips; VHF mostly line of sight.

T3C03: What is one characteristic of VHF signals received via auroral backscatter?
  • A. They are often received from 10,000 miles or more
  • B. They are distorted, with a characteristic raspy sound βœ“
  • C. They occur only during winter nighttime hours
  • D. They are generally strongest when your antenna is aimed west
Why, and a memory hook

VHF signals received via auroral backscatter are distorted and have a characteristic raspy sound.

Memory hook: Aurora makes it raspy.

T3C04: Which of the following types of propagation is most commonly associated with occasional strong signals on the 10-, 6-, and 2-meter bands from beyond the radio horizon?
  • A. Backscatter
  • B. Sporadic E βœ“
  • C. D region absorption
  • D. Gray-line propagation
Why, and a memory hook

Sporadic E propagation, from patches of ionization in the E layer, commonly causes occasional strong over-the-horizon signals on 10, 6 and 2 meters.

Memory hook: Sporadic E: sudden summer openings.

T3C05: Which of the following effects may allow radio signals to travel beyond obstructions between the transmitting and receiving stations?
  • A. Knife-edge diffraction βœ“
  • B. Faraday rotation
  • C. Quantum tunneling
  • D. Doppler shift
Why, and a memory hook

Knife-edge diffraction bends radio waves around the edge of an obstruction, allowing signals to reach beyond it.

Memory hook: Waves bend over a ridge.

T3C06: What type of propagation is responsible for allowing over-the-horizon VHF and UHF communications to ranges of approximately 300 miles on a regular basis?
  • A. Tropospheric ducting βœ“
  • B. D region refraction
  • C. F2 region refraction
  • D. Faraday rotation
Why, and a memory hook

Tropospheric ducting, caused by temperature inversions, allows regular VHF and UHF communications to about 300 miles.

Memory hook: Ducts carry signals far.

T3C07: What band is best suited for communicating via meteor scatter?
  • A. 33 centimeters
  • B. 6 meters βœ“
  • C. 2 meters
  • D. 70 centimeters
Why, and a memory hook

Six meters is the band best suited for meteor scatter, because meteor trails reflect signals most reliably at the low end of VHF.

Memory hook: Six meters for meteors.

T3C08: What causes tropospheric ducting?
  • A. Discharges of lightning during electrical storms
  • B. Sunspots and solar flares
  • C. Updrafts from hurricanes and tornadoes
  • D. Temperature inversions in the atmosphere βœ“
Why, and a memory hook

Tropospheric ducting is caused by temperature inversions, where a layer of warm air sits over cooler air.

Memory hook: Inversion makes the duct.

T3C09: What is generally the best time for long-distance 10-meter band propagation via the F region?
  • A. From dawn to shortly after sunset during periods of high sunspot activity βœ“
  • B. From shortly after sunset to dawn during periods of high sunspot activity
  • C. From dawn to shortly after sunset during periods of low sunspot activity
  • D. From shortly after sunset to dawn during periods of low sunspot activity
Why, and a memory hook

For long-distance 10-meter propagation via the F region, the best time is from dawn to shortly after sunset during periods of high sunspot activity.

Memory hook: Sunspots plus daylight equals ten-meter DX.

T3C10: Which of the following bands may provide long-distance communications via the ionosphere’s F region during the peak of the sunspot cycle?
  • A. 6 and 10 meters βœ“
  • B. 23 centimeters
  • C. 70 centimeters and 1.25 meters
  • D. All these choices are correct
Why, and a memory hook

At the peak of the sunspot cycle, the F region can support long-distance communications on the 6- and 10-meter bands.

Memory hook: High sunspots open 10 and 6.

T3C11: Why is the radio horizon for VHF and UHF signals more distant than the visual horizon?
  • A. Radio signals move somewhat faster than the speed of light
  • B. Radio waves are not blocked by dust particles
  • C. The atmosphere refracts radio waves slightly βœ“
  • D. Radio waves are blocked by dust particles
Why, and a memory hook

The atmosphere slightly refracts (bends) VHF and UHF waves, so the radio horizon is more distant than the visual horizon.

Memory hook: Refraction extends the horizon.

Test yourself on these

Take a free 35-question practice exam drawn one per group, just like the real thing.

Start the free practice test

← T2: Operating ProceduresAll subelementsT4: Amateur Radio Practices β†’

Sources

  1. NCVEC: 2026–2030 Technician Question Pool (public release and errata)
  2. 47 CFR Β§ 97.503: Element standards (35 questions, 26 to pass)

Want the why behind all 409 questions?

Ham Tech Exam is a Technician study app that explains every answer with a memory hook. Join the list to get the beta first and the launch-day price.

One email when the beta opens, one at launch. No spam. Unsubscribe anytime by emailing [email protected].