T2: Operating Procedures questions (2026–2030 Technician pool)
All 37 questions from subelement T2, Operating Procedures, with the correct answer marked. Your exam draws one question from each group below, so you'll see 3 T2 questions. On test day the answer order can be shuffled, so learn the answer, not the letter. Tap "Why" for a plain-English explanation.
T2A (11 questions, 1 on your exam)
- A. Plus or minus 5 MHz
- B. Plus or minus 600 kHz ✓
- C. Plus or minus 500 kHz
- D. Plus or minus 1 MHz
Why, and a memory hook
The common 2-meter repeater offset is plus or minus 600 kHz, with the sign depending on the part of the band. [97.301]
Memory hook: Two meters: 600 kHz.
- A. 146.520 MHz ✓
- B. 145.000 MHz
- C. 432.100 MHz
- D. 446.000 MHz
Why, and a memory hook
146.520 MHz is the national FM simplex calling frequency on 2 meters.
Memory hook: One-forty-six five-two-oh calls simplex.
- A. Plus or minus 5 MHz ✓
- B. Plus or minus 600 kHz
- C. Plus or minus 500 kHz
- D. Plus or minus 1 MHz
Why, and a memory hook
The common 70-centimeter repeater offset is plus or minus 5 MHz.
Memory hook: Seventy cm: five MHz.
- A. Say "break, break," then the other station’s call sign, followed by your call sign
- B. Say the station's call sign, then identify with your call sign ✓
- C. Say "CQ" three times, then the other station's call sign, followed by your call sign
- D. Wait for the station to call CQ, then answer with your call sign
Why, and a memory hook
On a repeater, give the other station's call sign first, then your own. This is the usual way to call a specific station.
Memory hook: Their call, then mine.
- A. Transmit "CQ" followed by the other station’s call sign
- B. Transmit your call sign followed by the other station’s call sign
- C. Transmit the other station’s call sign followed by your call sign ✓
- D. Transmit a signal report followed by your call sign
Why, and a memory hook
Respond to CQ by sending the calling station's call sign and then your own.
Memory hook: Theirs first, then yours.
- A. Sign your call sign once, followed by the words “listening for a call;” if there is no answer, change the frequency and repeat
- B. Say “QTC,” followed by “this is” and your call sign; if there is no answer, change the frequency and repeat
- C. Transmit an unmodulated carrier for approximately 10 seconds, followed by “this is” and your call sign, and pause to listen; repeat as necessary
- D. Repeat “CQ” a few times, followed by “this is,” and your call sign, then pause to listen; repeat as necessary ✓
Why, and a memory hook
Repeat CQ a few times, then say "this is" and your call sign, then pause to listen. Repeating as needed is a clear, effective way to attract a reply.
Memory hook: CQ, this is me, then listen.
- A. The difference between a repeater’s transmit and receive frequencies ✓
- B. The repeater has a time delay to prevent interference
- C. The approximately half-second delay to allow for the “squelch tail” to be removed
- D. The fee charged by the repeater owner or club to provide for maintenance
Why, and a memory hook
Repeater offset is the difference between a repeater's transmit and receive frequencies.
Memory hook: Offset = gap between output and input.
- A. A shortened form of the term “Contest QSO”
- B. “Communication Quality,” used to indicate transmitted audio clarity
- C. Only the called station should transmit
- D. Calling any station ✓
Why, and a memory hook
The procedural signal CQ means calling any station. It is a general call, not directed at one station.
Memory hook: CQ sounds like "seek you".
- A. “CQ CQ” followed by the repeater’s call sign
- B. The station’s call sign followed by the word “listening” ✓
- C. The repeater’s call sign followed by the station’s call sign
- D. “QSY” followed by your call sign
Why, and a memory hook
Saying your call sign followed by "listening" is the customary way to show you are monitoring a repeater and want a contact.
Memory hook: Call sign plus listening.
- A. A voluntary guideline for using different modes or activities within an amateur band ✓
- B. A list of operating schedules
- C. A list of available net frequencies
- D. A plan devised by a club to indicate frequency band usage
Why, and a memory hook
A band plan is a voluntary guideline for using modes or activities within an amateur band, beyond FCC privileges. Following it helps avoid interference.
Memory hook: Band plans are voluntary guidelines.
- A. Full duplex
- B. Diplex
- C. Simplex ✓
- D. Multiplex
Why, and a memory hook
Simplex means transmitting and receiving on the same frequency, with no repeater involved.
Memory hook: Simplex: single frequency.
T2B (14 questions, 1 on your exam)
- A. To reduce power output
- B. To increase power output
- C. To listen on a repeater’s input frequency ✓
- D. To listen on a repeater’s output frequency
Why, and a memory hook
The reverse (REV) function swaps your transmit and receive frequencies so you can listen on the repeater's input. It lets you check whether you can hear the other station directly.
Memory hook: Reverse flips to the input.
- A. Carrier squelch
- B. Tone burst
- C. DTMF
- D. CTCSS ✓
Why, and a memory hook
CTCSS (Continuous Tone-Coded Squelch System, often "PL") sends a sub-audible tone along with voice to open the repeater's squelch.
Memory hook: CTCSS: tone below the voice.
- A. A network of repeaters in which signals received by one repeater are transmitted by all the repeaters in the network ✓
- B. A single repeater with more than one receiver
- C. Multiple repeaters with the same control operator
- D. A system of repeaters linked by APRS
Why, and a memory hook
In a linked repeater network, a signal received by one repeater is transmitted by all repeaters in the network.
Memory hook: Linked means one hears, all talk.
- A. Improper transceiver offset
- B. You are using the wrong CTCSS tone
- C. You are using the wrong DCS code
- D. All these choices are correct ✓
Why, and a memory hook
You may not be able to access a repeater you can hear if you have the wrong offset, miss a required CTCSS tone, or have the wrong tone frequency set, so all of the choices can be causes.
Memory hook: Check offset, tone, and tone frequency.
- A. Your repeater offset is inverted
- B. Your FM deviation is too low
- C. You are talking too loudly ✓
- D. Your transmit power is too high
Why, and a memory hook
FM audio drops out on voice peaks when you talk too loudly, which over-deviates the signal. Back away from the microphone or speak more softly.
Memory hook: Too loud clips the peaks.
- A. DTMF ✓
- B. CTCSS
- C. GMRS
- D. D-STAR
Why, and a memory hook
DTMF uses two simultaneous audio tones for each key, such as the tones from a keypad, and is often used to control repeaters and autopatches.
Memory hook: Dual-tone multi-frequency.
- A. Register with the local Frequency Coordinator
- B. Register with the digital repeater control operator
- C. Program your radio with the group’s ID or code ✓
- D. Program your radio with the DTMF tone used by the talkgroup
Why, and a memory hook
To join a digital repeater talkgroup, program your radio with the group's ID or code.
Memory hook: Program the talkgroup ID.
- A. The stations should negotiate continued use of the frequency ✓
- B. Both stations should choose another frequency to avoid conflict
- C. Whichever station was on the frequency first has preemptive rights to the frequency
- D. Use subaudible tones so both stations can share the frequency
Why, and a memory hook
Stations interfering with each other on the same frequency should negotiate use of the frequency, since no one has exclusive rights to it. [97.101(b)]
Memory hook: Talk it out; no one owns a frequency.
- A. So stations within range of each other can communicate without tying up a repeater ✓
- B. For contest operation
- C. For working DX only
- D. So stations with simple transmitters can access the repeater without automated offset
Why, and a memory hook
Simplex channels let stations within range of each other communicate directly without tying up a repeater.
Memory hook: Simplex frees the repeater.
- A. QRM ✓
- B. QRN
- C. QTH
- D. QSB
Why, and a memory hook
QRM means "I am being interfered with" by other stations. QRN is natural static noise.
Memory hook: QRM = man-made interference.
- A. QRU
- B. QSY ✓
- C. QSL
- D. QRZ
Why, and a memory hook
QSY means "change frequency." It is used when you move to another frequency.
Memory hook: QSY: Quickly Shift Your frequency.
- A. An access code which must be programmed into a DMR transmitter to access a specific repeater ✓
- B. A code which automatically programs the repeater offset to a frequency chosen by the user
- C. A code which identifies the specific CODEC being used so that the repeater can properly decode the audio
- D. A code transmitted by the repeater to indicate health and status of the equipment
Why, and a memory hook
A DMR color code is an access code programmed into the radio so it can access a specific repeater.
Memory hook: Color code = key to the repeater.
- A. Reduce a CW transmitter's key clicks
- B. Mute the receiver audio when a signal is not present ✓
- C. Eliminate parasitic oscillations in an RF amplifier
- D. Reduce interference from impulse noise
Why, and a memory hook
A squelch circuit mutes receiver audio when no signal is present, so you do not hear constant noise.
Memory hook: Squelch silences the hiss.
- A. A group of amateur radio operators who share email on a specific amateur radio topic
- B. An identifier used by DMR to organize radio traffic so that those who want to hear the group aren’t bothered by other radio traffic ✓
- C. The members of a net organized for amateur radio operators with a specific common interest
- D. A method of automatically alerting all group members to the frequency where any member is transmitting
Why, and a memory hook
On DMR, a talkgroup is an identifier that organizes radio traffic so only the people who want to hear a group's traffic receive it.
Memory hook: Talkgroup = topic channel.
T2C (12 questions, 1 on your exam)
- A. When operating under RACES rules
- B. When operating under FEMA rules
- C. When operating under ARES rules
- D. FCC rules always apply ✓
Why, and a memory hook
FCC Part 97 rules always apply to amateur stations. There is no situation in which they stop applying.
Memory hook: The rules never turn off.
- A. Choose the regular net meeting time and frequency
- B. Ensure that all stations checking into the net are properly licensed for operation on the net frequency
- C. Call the net to order and direct communications between stations checking in ✓
- D. All these choices are correct
Why, and a memory hook
A Net Control Station opens the net, calls for check-ins, and directs communications among the stations checking in.
Memory hook: Net control directs traffic.
- A. Send the words by voice and Morse code
- B. Use the Q-code “QSR” to ask the receiving station to repeat the words back
- C. Spell the words using a standard phonetic alphabet ✓
- D. All these choices are correct
Why, and a memory hook
Spell unusual words with a standard phonetic alphabet so the receiving station copies them correctly.
Memory hook: Spell it phonetically.
- A. An emergency organization combining amateur radio and citizens band operators and frequencies
- B. An international radio experimentation society
- C. A radio contest held in a short period, sometimes called a “sprint”
- D. An FCC Part 97 amateur radio service for civil defense communications during national emergencies ✓
Why, and a memory hook
RACES is an FCC Part 97 amateur radio service for civil defense communications during national emergencies. [97.407]
Memory hook: RACES = civil defense.
- A. Formal messages exchanged by net stations ✓
- B. The number of stations checking in and out of a net
- C. Operation by mobile or portable stations
- D. A count of the number of activations of the net each month
Why, and a memory hook
In net operation, traffic means formal messages exchanged by net stations, such as radiograms.
Memory hook: Traffic is message traffic.
- A. A group of licensed amateurs who have voluntarily registered their qualifications and equipment for communications duty in the public service ✓
- B. A group of licensed amateurs who are members of the military and who voluntarily agreed to provide message handling services in the case of an emergency
- C. A training program that provides licensing courses for those interested in obtaining an amateur license to use during emergencies
- D. A training program that certifies amateur operators for membership in the Radio Amateur Civil Emergency Service
Why, and a memory hook
ARES is a group of licensed amateurs who have voluntarily registered their qualifications and equipment for communications duty in public service.
Memory hook: ARES = volunteers, registered.
- A. When first responding to the net control station, transmit your call sign, name, and address as in the FCC database
- B. Record the time of each of your transmissions
- C. Unless you are reporting an emergency, transmit only when directed by the net control station ✓
- D. All these choices are correct
Why, and a memory hook
In a net, transmit only when directed by the net control station unless you are reporting an emergency. This keeps the net orderly.
Memory hook: Wait for net control.
- A. Winlink ✓
- B. FT8
- C. PSK31
- D. AMTOR
Why, and a memory hook
Winlink relays messages using email addresses based on amateur call signs. It works over radio links to internet gateways.
Memory hook: Winlink = email by radio.
- A. No
- B. Yes, but only when part of a FEMA emergency plan
- C. Yes, but only when part of a RACES emergency plan
- D. Yes, but only in situations involving the immediate safety of human life or protection of property ✓
Why, and a memory hook
A control operator may operate outside their class privileges only in situations involving the immediate safety of human life or protection of property. [97.405(a)]
Memory hook: Only for life and property.
- A. The email address of the originating station
- B. The address of the intended recipient
- C. The telephone number of the addressee
- D. Information needed to track the message ✓
Why, and a memory hook
A formal message preamble contains the information needed to track the message, such as message number, precedence and station of origin.
Memory hook: Preamble = tracking info.
- A. The number of words or word equivalents in the text portion of the message ✓
- B. The call sign of the originating station
- C. A list of stations that have relayed the message
- D. A box on the message form that indicates that the message was received and/or relayed
Why, and a memory hook
In a radiogram header, the check is the number of words or word equivalents in the text of the message. It lets the receiver verify the text was copied completely.
Memory hook: Check counts the words.
- A. ARES
- B. RACES ✓
- C. MARS
- D. SKYWARN
Why, and a memory hook
RACES requires certification by a civil defense agency. ARES does not. [97.407]
Memory hook: RACES needs civil defense; ARES only volunteers.
Test yourself on these
Take a free 35-question practice exam drawn one per group, just like the real thing.
Start the free practice test← T1: Commission's Rules (FCC Part 97)All subelementsT3: Radio Wave Propagation →