Technician exam math: every formula you need

Updated November 20, 2026 · 8 min read · by the Ham Tech Exam team
  • You need about six formulas, and most of the math is in subelement T5 (4 questions on your exam) plus a few in T3 and T9.
  • Learn E = I × R, P = E × I, wavelength = 300 ÷ MHz, the 3 dB / 10 dB rules and metric prefixes, and you can answer every calculation in the pool.
  • Calculators are generally allowed if memories are cleared, but you'll rarely need one.

Math is the part of the Technician exam that worries people most, and it shouldn't. Every calculation question in the 2026–2030 pool uses round numbers and a handful of formulas. If you can multiply and divide, you can get these right. Here's everything you need, with real questions from the pool.

The cheat sheet

TopicFormulaWhat it means
Ohm's lawE = I × RVoltage (volts) = current (amps) × resistance (ohms). Rearrange: I = E ÷ R, R = E ÷ I.
PowerP = E × IPower (watts) = voltage × current. Rearrange: I = P ÷ E, E = P ÷ I.
Wavelengthλ (m) = 300 ÷ f (MHz)Frequency in MHz to wavelength in meters. 146 MHz → about 2 m.
Decibels3 dB ≈ ×2, 6 dB ≈ ×4, 10 dB = ×10Negative dB means a decrease: −3 dB is half the power, −6 dB a quarter.
Metric prefixesk = 10³, M = 10⁶, G = 10⁹; m = 10⁻³, µ = 10⁻⁶, p = 10⁻¹²Move the decimal three places for each step between kilo, mega, giga or milli, micro, nano, pico.
Antenna length½-wave dipole (ft) ≈ 468 ÷ f (MHz); ¼-wave vertical ≈ 234 ÷ fRule of thumb. A 2 m quarter-wave is about 19 inches.

Ohm's law (E = I × R)

Ohm's law ties together voltage (E, in volts), current (I, in amperes) and resistance (R, in ohms). The pool asks for each form of the formula: current is I = E / R (T5D01), voltage is E = I × R (T5D02) and resistance is R = E / I (T5D03).

Memory trick: draw a triangle with E on top and I and R on the bottom. Cover the one you want: E is I next to R (multiply), I is E over R (divide), R is E over I.

T5D04: What is the resistance of a circuit in which a current of 3 amperes flows when connected to 90 volts?
  • A. 3 ohms
  • B. 30 ohms ✓
  • C. 1/30 ohm
  • D. 270 ohms

Why: R = E / I = 90 V / 3 A = 30 ohms.

Memory hook: 90 over 3 is 30.

T5D09: What is the current through a 24-ohm resistor connected across 240 volts?
  • A. 2400 amperes
  • B. 0.1 amperes
  • C. 10 amperes ✓
  • D. 5760 amperes

Why: I = E / R = 240 V / 24 ohms = 10 A.

Memory hook: 240 over 24 is 10.

Every Ohm's law question in the pool is one of these three shapes. Find the two numbers given, pick the right arrangement, and do one multiplication or division.

Power (P = E × I)

Power in watts equals voltage times current (T5C08). The classic question uses a 13.8 V supply, the standard voltage for mobile and base radios:

T5C09: How much power is delivered by a voltage of 13.8 volts DC and a current of 10 amperes?
  • A. 138 watts ✓
  • B. 0.7 watts
  • C. 23.8 watts
  • D. 3.8 watts

Why: P = E x I = 13.8 V x 10 A = 138 W.

Memory hook: 13.8 times 10 is 138.

T5C11: How much current is required to deliver 120 watts at a voltage of 12 volts DC?
  • A. 0.1 amperes
  • B. 10 amperes ✓
  • C. 12 amperes
  • D. 132 amperes

Why: Rearranging P = E x I gives I = P / E = 120 W / 12 V = 10 A.

Memory hook: Current = watts over volts.

Same triangle trick: P on top, E and I on the bottom.

Metric prefixes and unit conversions

About a dozen questions in T5B are just moving a decimal point. Each step between kilo (k), mega (M) and giga (G), or between milli (m), micro (µ), nano (n) and pico (p), is a factor of 1,000.

Decibels

Decibels describe ratios. You only need three facts: doubling power is about +3 dB, four times the power is about +6 dB and ten times the power is +10 dB. Going down works the same way with a minus sign.

T5B09: Which decibel value most closely represents a power increase from 5 watts to 10 watts?
  • A. 2 dB
  • B. 3 dB ✓
  • C. 5 dB
  • D. 10 dB

Why: Doubling power (5 W to 10 W) is a 3 dB increase.

Memory hook: Double power = plus 3 dB.

T5B10: Which decibel value most closely represents a power decrease from 12 watts to 3 watts?
  • A. -1 dB
  • B. -3 dB
  • C. -6 dB ✓
  • D. -9 dB

Why: Cutting 12 watts to 3 watts is a factor of one fourth, which is two halvings, or 2 times (-3 dB) = -6 dB.

Memory hook: Quarter power = minus 6 dB.

12 W to 3 W is a quarter of the power: two halvings, so −3 dB twice, or −6 dB.

Frequency and wavelength

Radio waves travel at the speed of light, about 300,000,000 meters per second (T3B11). That gives the handy formula: wavelength in meters = 300 ÷ frequency in MHz (T3B06). It's why bands have names like "2 meters": 300 ÷ 146 MHz is about 2.05 m. Higher frequency means shorter wavelength (T3B05).

Antenna length

A few T9 questions ask about antenna size. A half-wave dipole is about 468 ÷ frequency (MHz) feet long, and a quarter-wave vertical about 234 ÷ frequency. For 2 meters at 146 MHz, a quarter-wave vertical is about 19 inches.

T9A08: Why is a 19-inch-long vertical antenna often used on 2 meters?
  • A. It has high gain
  • B. It is a resonant half-wave
  • C. It is a resonant quarter-wave ✓
  • D. It has low RF radiation exposure

Why: A quarter wavelength on 2 meters is about 19 inches, so a 19-inch vertical is a resonant quarter-wave.

Memory hook: 2 m quarter wave is 19 inches.

How many math questions are on the exam?

Your 35-question exam draws one question from each of 35 groups. Subelement T5 (Electrical Principles) has 4 groups, so you'll see 4 questions from it, and only some are calculations. Add a possible wavelength question from T3 and an antenna-length question from T9, and math is typically 2 to 5 questions. You need 26 correct to pass (47 CFR § 97.503), so you could skip math entirely and still pass, but these are some of the easiest points on the test once the formulas click.

SubelementTopicQuestions on your examQuestions in the pool
T1Commission's Rules (FCC Part 97)668
T2Operating Procedures337
T3Radio Wave Propagation335
T4Amateur Radio Practices223
T5Electrical Principles450
T6Electronic and Electrical Components446
T7Practical Circuits444
T8Signals and Emissions447
T9Antennas and Feed Lines223
T0Safety336
Total35409

How to practice

  1. Write the cheat sheet from memory once a day for a week.
  2. Work through the T5 Electrical Principles questions in the free question browser.
  3. Take a full practice test and check you get the math right every time.

Try a free practice test

35 real questions from the 2026–2030 pool, drawn one per group like the actual exam, with the reason behind every answer. No sign-up.

Start the free practice test

FAQ

Is there a lot of math on the Technician exam?

No. Usually 2 to 5 of the 35 questions involve a calculation, and they all use simple formulas: Ohm's law, power, wavelength, decibels and metric prefixes.

Can I use a calculator on the ham radio exam?

Generally yes, as long as any memory is cleared. Check with your exam team, since rules can vary by VEC. Most questions use round numbers you can do in your head.

What is Ohm's law on the Technician exam?

E = I × R: voltage equals current times resistance. The pool asks for each form, I = E / R and R = E / I, and simple calculations with them.

Sources

  1. NCVEC: 2026–2030 Technician Question Pool (public release and errata)
  2. 47 CFR § 97.503: Element standards (35 questions, 26 to pass)

Want the why behind all 409 questions?

Ham Tech Exam is a Technician study app that explains every answer with a memory hook. Join the list to get the beta first and the launch-day price.

One email when the beta opens, one at launch. No spam. Unsubscribe anytime by emailing [email protected].