What can you do with a Technician license?

Updated November 20, 2026 · 7 min read · by the Ham Tech Exam team
  • Technicians get all amateur privileges above 50 MHz: 6 m, 2 m, 1.25 m, 70 cm and the microwave bands, at up to 1,500 W PEP.
  • On HF you get CW (Morse) on parts of 80, 40 and 15 meters, and CW, data and SSB voice on 10 meters (28.0–28.5 MHz), at up to 200 W PEP.
  • That's enough for local repeaters, simplex, satellites, the ISS, digital modes like FT8 on 10 m and 6 m, and worldwide contacts when 10 m is open.

The Technician license is the entry-level US amateur radio license, and it's the one most new hams start with. People sometimes describe it as "VHF only," which undersells it. The privileges come straight from Part 97 of the FCC rules, and they're broader than most beginners expect. Here's what you can actually do with it, and what you can't.

Your privileges in one table

BandTechnician frequenciesModesMax power
80 m3.525–3.600 MHzCW only200 W PEP
40 m7.025–7.125 MHzCW only200 W PEP
15 m21.025–21.200 MHzCW only200 W PEP
10 m28.000–28.300 MHzCW, RTTY, data (e.g. FT8)200 W PEP
10 m28.300–28.500 MHzCW, SSB voice200 W PEP
6 m and upAll amateur bands: 50–54, 144–148, 222–225, 420–450 MHz, 902–928 MHz, 1240–1300 MHz and higherAll modes authorized on each band1,500 W PEP (with some local limits)

Sources: 47 CFR § 97.301 (bands), § 97.305 and § 97.307 (modes) and § 97.313 (power). The exam asks about these directly: the 10 m phone segment (T1B01), "10 meters only" for HF phone (T1B06), 200 W on HF (T1B11) and 1,500 W above 30 MHz (T1B12).

See every Technician frequency on one chart

The free chart shows each band, the exact segments, modes and power limits, and lets you check any frequency.

Open the Technician frequency chart

1. Talk around town on repeaters

This is what most new Technicians do first. A repeater is a station on a hilltop or tall building that receives your signal on one frequency and retransmits it on another, so a 5-watt handheld can reach across a city or county. Most repeaters are on 2 meters (144–148 MHz) and 70 centimeters (420–450 MHz), both fully open to you. Many areas have nightly nets where new hams are welcome to check in.

2. Simplex, hiking and road trips

Simplex means talking radio to radio without a repeater. The 2 m national simplex calling frequency is 146.52 MHz (T1B04 on your exam). It's popular for hiking groups, caravans, events and anywhere without cell service.

3. Help in emergencies and public service

Technicians make up a large part of emergency communications groups such as ARES and county RACES teams. You can volunteer for marathons, parades and bike rides, providing communications along the route, and train for disasters when phones and internet go down. Most of this work happens on VHF and UHF, where you have full privileges.

4. Make contacts around the world on 10 meters

When the sun is active, 10 meters opens up for long-distance contacts, and Technicians can use SSB voice from 28.300 to 28.500 MHz. You can also run digital modes such as FT8 between 28.000 and 28.300 MHz, which can make contacts across oceans with modest antennas. Your exam even asks which bands allow Technicians to use FT8 (T1B05).

5. Use Morse code on HF

There's no Morse code requirement for any US license, but if you learn it, Technicians can use CW on parts of 80, 40, 15 and 10 meters. CW is efficient: a simple low-power station can make long-distance contacts that voice can't.

6. Talk through satellites and the ISS

Amateur satellites relay signals on VHF and UHF, and with a handheld and a directional antenna you can work stations hundreds or thousands of miles away during a pass. Any Technician or higher may contact the International Space Station on its VHF amateur frequencies (T1B02).

7. Experiment with digital modes, mesh and weak signals

Above 50 MHz you can use a wide range of modes: FM, SSB, digital voice (DMR, D-STAR, System Fusion), packet and APRS position reporting, high-speed data and even amateur television. On 6 meters, summer "sporadic E" openings can bring contacts across the country. On 2 m and 70 cm, weak-signal SSB and digital modes reward better antennas.

8. Build and modify your own equipment

Unlike most radio services, amateurs may build and modify their own transmitters. Kits, antennas and homebrew projects are a big part of the hobby, and the Technician exam covers the safety and electronics basics you need to start.

What you can't do as a Technician

If those matter to you, the next step is General. See Technician vs. General: what changes when you upgrade.

How long your license lasts

An amateur license is normally issued for 10 years (T1C08). You can renew in the 90 days before it expires (T1C07), and there's a two-year grace period to renew, but you can't transmit during the grace period (T1C09, T1C11).

Try a free practice test

35 real questions from the 2026–2030 pool, drawn one per group like the actual exam, with the reason behind every answer. No sign-up.

Start the free practice test

FAQ

Can a Technician talk on HF?

Yes, on 10 meters only: SSB voice from 28.300 to 28.500 MHz. Technicians can also use CW on parts of 80, 40, 15 and 10 meters and data modes such as FT8 from 28.000 to 28.300 MHz.

How much power can a Technician use?

Up to 200 W PEP in the Technician HF segments and up to 1,500 W PEP above 30 MHz, with some local restrictions. FCC rules also require using the minimum power necessary.

Can Technicians use FT8?

Yes. Technicians can use data modes such as FT8 on 10 meters (28.000–28.300 MHz) and on all bands above 50 MHz, including 6 and 2 meters.

Do I need Morse code for a Technician license?

No. There is no Morse code requirement for any US amateur license, but Technicians may use CW if they learn it.

Sources

  1. 47 CFR § 97.301: Authorized frequency bands
  2. 47 CFR § 97.305: Authorized emission types
  3. 47 CFR § 97.307: Emission standards (Technician CW-only and SSB-only notes)
  4. 47 CFR § 97.313: Transmitter power standards (200 W PEP for Technicians on HF)
  5. ARRL: Frequency Allocations (US amateur band chart)
  6. NCVEC: 2026–2030 Technician Question Pool (public release and errata)

Want the why behind all 409 questions?

Ham Tech Exam is a Technician study app that explains every answer with a memory hook. Join the list to get the beta first and the launch-day price.

One email when the beta opens, one at launch. No spam. Unsubscribe anytime by emailing [email protected].