Ham radio call signs explained

Updated November 20, 2026 · 6 min read · by the Ham Tech Exam team
  • A US amateur call sign is a prefix (K, N, W, or two letters starting with A, K, N or W), a number 0–9 for the region, and a suffix of 1 to 3 letters.
  • The FCC assigns your first call sign automatically, in order, based on your license class and mailing address. New Technicians usually get a 2×3 call such as KF1ABC.
  • Any licensed amateur can request a vanity call sign, but only from the groups their license class allows.

After you pass your exam, the first thing everyone asks is "what's your call?" Here's how US call signs are built, why yours looks the way it does, and how to change it.

Anatomy of a call sign

Take KF7XYZ:

Hams describe formats by counting letters on each side of the number: KF7XYZ is a "2×3," N7XY is a "1×2," and so on.

Call sign groups and license class

The FCC's call sign system divides formats into four groups. Shorter calls are reserved for higher license classes.

GroupWhoFormats (regions 1–10)Example
AAmateur Extra1×2, 2×1, 2×2 starting with AW1AB, KA1A, AA1AB
BAdvanced (no longer issued)2×2 starting with K, N or WKB1AB
CGeneral, Technician1×3N1ABC
DNovice, club stations2×3 starting with K or WKF1ABC

Group C 1×3 calls ran out long ago in most regions, and when a group is exhausted the FCC assigns from the next lower group. That's why new Technicians and Generals almost always receive a 2×3 call sign. The exam asks about this: T1C05 asks which is a valid Group D format for a Technician, and the answer is KF1XXX.

T1C05: Which of the following is a valid Group D call sign format for Technician class?
  • A. KF1XXX ✓
  • B. KA1X
  • C. W1XX
  • D. All these choices are correct

Why: Group D call signs for Technicians use two letters, a digit and three letters, such as KF1XXX. Group D is the format for the Technician class; shorter calls belong to higher groups. [97.19]

Memory hook: D = two letters, one number, three letters.

What the number means

NumeralStates
1CT, ME, MA, NH, RI, VT
2NJ, NY
3DE, DC, MD, PA
4AL, FL, GA, KY, NC, SC, TN, VA
5AR, LA, MS, NM, OK, TX
6CA
7AZ, ID, MT, NV, OR, UT, WA, WY
8MI, OH, WV
9IL, IN, WI
0CO, IA, KS, MN, MO, NE, ND, SD

Alaska, Hawaii, Puerto Rico, the US Virgin Islands and the Pacific territories have their own prefixes (such as KL7, KH6 and KP4). Your numeral reflects where the call was issued. If you move, you can keep your call sign; there's no requirement to change it.

How your first call sign is assigned

You don't choose your first call. Under the sequential system, the FCC assigns the next available call from the list for your license class and mailing-address region when your license is granted. That happens after the VE team files your application and you pay the FCC's $35 fee. You may transmit as soon as your license appears in the FCC database (T1C10).

Vanity call signs

Any licensed amateur may request a vanity call sign (T1C02). Rules worth knowing:

When you upgrade to Extra, you become eligible for the short Group A calls that many hams prize.

Using your call sign on the air

You must identify with your call sign at least every 10 minutes during a contact and at the end. Saying it phonetically ("Kilo Foxtrot Seven X-ray Yankee Zulu") helps on weak or noisy signals. Rules on station identification are tested in subelement T1, which is the largest section of the exam.

Browse all 409 questions by topic

Every question in the 2026–2030 pool, grouped by subelement, with the correct answer and a plain-English reason.

Browse the question pool

Try a free practice test

35 real questions from the 2026–2030 pool, drawn one per group like the actual exam, with the reason behind every answer. No sign-up.

Start the free practice test

FAQ

What call sign will I get as a new Technician?

Usually a 2×3 call sign, such as KF1ABC, assigned automatically in sequence based on your mailing address region.

Can I choose my own ham radio call sign?

Yes. Any licensed amateur can request a vanity call sign in the FCC's ULS, from the call sign groups their license class allows. An FCC application fee applies.

Do I need to change my call sign if I move to another state?

No. You can keep your call sign when you move. The numeral reflects where the call was originally issued.

Sources

  1. FCC: Amateur Call Sign Systems
  2. 47 CFR § 97.19: Application for a vanity call sign
  3. FCC: Personal Service and Amateur Application Fees
  4. NCVEC: 2026–2030 Technician Question Pool (public release and errata)

Want the why behind all 409 questions?

Ham Tech Exam is a Technician study app that explains every answer with a memory hook. Join the list to get the beta first and the launch-day price.

One email when the beta opens, one at launch. No spam. Unsubscribe anytime by emailing [email protected].